Dead Metal

Locked
tas
Posts: 68
Joined: Tue Dec 02, 2008 1:26 pm
Location: Sarf East London

Re: Dead Metal

Post by tas »

Hear hear.

I'm sure the words 'on fire' and 'wouldn't waste my pee' spring to a few peoples minds when thinking of hlf.

So when K7 is in the museum, how close will people be able to get? Most people will probably want to get right up to her to smell the jet fuel, peer inside the cockpit and get a pic standing with the old girl. Yet allowing the general public to get too close and touchy-feely to such a priceless machine could also be a really quick way to wreck it as a living exhibit.

So what kind of exhibition can we expect?
"He who goes to bed with an itchy bum, wakes up with a smelly finger"
User avatar
Renegadenemo
Posts: 5176
Joined: Mon Dec 01, 2008 12:29 pm
Location: N E England
Contact:

Re: Dead Metal

Post by Renegadenemo »

Don't worry, you'll be able to get properly close. I even wanted to get some dusters and have the museum hire them out so the public could keep K7 shiny but they're worried about the pait wearing out. They're no fun those museologists. But dent one of our panels and we'll be after you with a rivet gun!
I'm only a plumber from Cannock...

"As to reward, my profession is its own reward;" Sherlock Holmes.

'It ain't what they call you, it's what you answer to.' W.C. Fields.
User avatar
mtskull
Posts: 664
Joined: Thu Jan 21, 2010 10:32 pm
Location: West Yorkshire

Re: Dead Metal

Post by mtskull »

Talking of dead metal (and apologies if this is off-topic), I recall that a couple of years back, Holker Hall motor museum had a very mangled piece of K7 on display; I presume recovered in 1967. Might it be worth asking if they would swap it for a bit of LOOF, and incorporate a bit more original tin into the finished boat?
Obstacles are those frightful things you see when you take your eyes off your goals.
User avatar
bluebirdsback
Posts: 458
Joined: Thu Dec 18, 2008 11:45 pm

Re: Dead Metal

Post by bluebirdsback »

Not so Mike. I am sure i could make a rivet gun very scary. Having one surgicaly removed from the rectal area would scare the hell out of me. Mind you these are the ramblings of a peace loving man going through withdrawell symptoms of his smokey tabs, I should be less violent orientated come the launch. So anyone denting the boat then will have a staple gun fired at him at worst.
The moment you make something idiot proof a new breed of idiots will come along and prove you wrong
User avatar
bluebirdsback
Posts: 458
Joined: Thu Dec 18, 2008 11:45 pm

Re: Dead Metal

Post by bluebirdsback »

Maybe a chalkie or chinese burn or even a coco stump for more serious dents
The moment you make something idiot proof a new breed of idiots will come along and prove you wrong
User avatar
Piston Broke
Site Admin
Posts: 395
Joined: Thu Dec 04, 2008 12:49 pm

Re: Dead Metal

Post by Piston Broke »

bluebirdsback wrote: withdrawell symptoms of his smokey tabs,
Our Rob isn't kicking the habit is he? He'll be stopping watching/listening to football next !!!! :lol: :lol: :lol: :lol: :lol:
If it can't be fixed with duck tape it can't be fixed
There is a very fine line between "hobby" and "mental illness"
Facebook is to socialising is what masturbation is to sex
User avatar
Roger Wilco
Posts: 34
Joined: Thu Feb 18, 2010 8:35 pm

Re: Dead Metal

Post by Roger Wilco »

Regarding 'dead' exhibits - I feel the same way whenever I see Mallard* at York Railway Museum. I always imagine someone slipping in there in the wee small hours armed with a bag of Coalite, some firelighters and a tin of WD40..

* Odd, Duck-based name for record-busting streamlined Leviathan though?
User avatar
Renegadenemo
Posts: 5176
Joined: Mon Dec 01, 2008 12:29 pm
Location: N E England
Contact:

Re: Dead Metal

Post by Renegadenemo »

Regarding 'dead' exhibits - I feel the same way whenever I see Mallard* at York Railway Museum.
I was dismayed by that too. There she was all dead and cold yet not a hundred yard away they had two locos all fired up dripping oil and hissing steam but what impressed me most was how the ground rumbled slightly as they moved. Much more exciting than Mallard
I'm only a plumber from Cannock...

"As to reward, my profession is its own reward;" Sherlock Holmes.

'It ain't what they call you, it's what you answer to.' W.C. Fields.
User avatar
klingon
Posts: 644
Joined: Fri Feb 27, 2009 8:22 pm
Location: Paisley Scotland

Re: Dead Metal

Post by klingon »

Yeah-used to stand right next to the Buchanan st railway tunnel at Pinkston in Glasgow and the A4 Pacifics would come screaming by 6 feet away-incredible!-the rail lines used to bounce up and down about 6 inches with the weight and "steam hammer"-aaah the memories of a bygone youth! :cry:
"I hate two faced people-don't know which face to punch first!"
lsrdatabase

Re: Dead Metal

Post by lsrdatabase »

Renegadenemo wrote:
Regarding 'dead' exhibits - I feel the same way whenever I see Mallard* at York Railway Museum.
I was dismayed by that too. There she was all dead and cold yet not a hundred yard away they had two locos all fired up dripping oil and hissing steam but what impressed me most was how the ground rumbled slightly as they moved. Much more exciting than Mallard
Hi all,
I remember way back in my very young days, (early 50's) my older brother (train spotter type anorak), wanted to go train spotting at Kings X, but Mum told him, only if you take him (me).

What I remember of that day was, while standing at the end of the platform, 'Mallard' came out of St Pancras and crossed over the tracks very near where we were standing. "What is that", I asked, and he explained that it was Mallard holder of the worlds speed record for steam locos, I replied with "Isn't she beautiful". He replied, "I suppose so".

Strangely enough my brother no longer remembers that day, as it was just another days train spotting nothing more. Where-as I still have that memory of seeing 'Mallard', both in STEAM and in SERVICE.

Regards to all, Fred

'I'm just that bloke, who won't go away'.
Locked