Page 37 of 97
Re: Bluebird Models
Posted: Mon Sep 29, 2014 8:23 pm
by Renegadenemo
Hi Mark,
Not sure to what extent we can help you in here as we're mostly concerned with the boat. if the boat drawings are any indication, and we occasionally get asked to help model makers with regard to the boat, then the car drawings will be of a zillion small parts too and of little use to a model maker. Maybe you'd be better off working and scaling from archive photos. After all, it works for us most of the time.
Re: CN7 Model
Posted: Tue Sep 30, 2014 12:14 am
by K7boats
markm wrote:Hello
Here's hoping I can find the help I need to build a 1/8th scale radio controlled model of CN7
I have found a drawing on the web of CN7 which shows her in side, front and rear profile and also in section at the centre of the front and rear wheels and also midway between
I need to come up with a set of drawings much like a model ships drawings that show the shape from front to rear so as to be able to get the correct body profile.
Are such drawings available or can anyone help me convert the drawing I have
I propose to build a radio controlled electric powered model at 1/8th scale
I have managed to source a set of wheels which can be utilised and also a turbine sound unit
Any help would be greatly appreciated
Regards
Mark
Hello Mark , you may have seen my K7 project after it is finished I was going to build a CN7 but it's took me 2 years + to get to a certain stage and I've still to finish the boat shed launch rig and Jetstar to name a few!! I do have a set of drawings of CN7 but don't have a scanner or printer large enough to copy them but I will see if I can get some done after a long time and thought I decided to change direction I've decided to build a working model of the CN8 rocket car as I don't think it's been done and it would be nice to see if it works but that would be after my main project K7 and if I'm still young and fit enough
Re: Bluebird Models
Posted: Sat May 30, 2015 6:52 pm
by longarmedgibbon
Heres a just finished working k4 my dad (ernie lazenby) has just finished
Re: Bluebird Models
Posted: Sat May 30, 2015 7:49 pm
by jonwrightk7
absolutely stunning Ian!!!!!!!
Re: Bluebird Models
Posted: Sat May 30, 2015 10:15 pm
by quicksilver-wsr
Wow! Impressive
Nigel
Re: Bluebird Models
Posted: Mon Jun 01, 2015 1:26 pm
by f1steveuk
Ernie is quiet good isn't he!!
Re: CN7 Model
Posted: Sat Jun 06, 2015 10:41 am
by astalclive_elliott
markm wrote:Hello
Here's hoping I can find the help I need to build a 1/8th scale radio controlled model of CN7
I have found a drawing on the web of CN7 which shows her in side, front and rear profile and also in section at the centre of the front and rear wheels and also midway between
I need to come up with a set of drawings much like a model ships drawings that show the shape from front to rear so as to be able to get the correct body profile.
Are such drawings available or can anyone help me convert the drawing I have
I propose to build a radio controlled electric powered model at 1/8th scale
I have managed to source a set of wheels which can be utilised and also a turbine sound unit
Any help would be greatly appreciated
Regards
Mark
Hi
these any good to you?
Re: Bluebird & Other Scale Models
Posted: Thu Jun 11, 2015 6:42 pm
by rob565uk
Looks very impressive Mike - great detail and detailing
Re: Bluebird & Other Scale Models
Posted: Fri Jun 12, 2015 1:11 am
by Richie
Will have to commission you to do me a Britannic wreck !
Re: Bluebird & Other Scale Models
Posted: Sun Aug 02, 2015 4:12 pm
by longarmedgibbon
Heres a working sratch built miss canadianna built by ernie lazenby