Pic of the Day

Post Reply
no1traumanurse
Posts: 36
Joined: Sun Dec 06, 2009 9:13 pm
Location: Scunthorpe

Re: Pic of the Day

Post by no1traumanurse » Sun Feb 26, 2017 10:44 am

Will that take its strength back to original or is it just more important that it evens its properties after all the seperate areas of stretching, shrinking and welding?

User avatar
Renegadenemo
Posts: 4588
Joined: Mon Dec 01, 2008 12:29 pm
Location: N E England
Contact:

Re: Pic of the Day

Post by Renegadenemo » Sun Feb 26, 2017 9:36 pm

Will that take its strength back to original or is it just more important that it evens its properties after all the seperate areas of stretching, shrinking and welding?
All of the above. There's just no dealing with it in its hard condition and once it's soft it would hydroform into the iner floor corrugations soon as we put any load on it.
We spent all of Saturday subtly shifting the front of the floor a quarter inch to the left to line up some rivet holes but this was only possible because it's so soft. Good news is it's coming back to us very quickly so it shouldn't be too long before it's back for heat treatment.
I'm only a plumber from Cannock...

"As to reward, my profession is its own reward;" Sherlock Holmes.

I have wrought my simple plan
If I give one hour of joy
To the boy who’s half a man,
Or the man who’s half a boy.

Sir Arthur Conan Doyle.

User avatar
mtskull
Posts: 613
Joined: Thu Jan 21, 2010 10:32 pm
Location: West Yorkshire

Re: Pic of the Day

Post by mtskull » Tue Feb 28, 2017 10:30 am

When you say the breathing air bottle holder won't be used again, do you mean that you won't be putting it back, or just that it won't need to hold a breathing air bottle again? Was DMC using breathing air during the 1966/67 attempt?
Obstacles are those frightful things you see when you take your eyes off your goals.

User avatar
Mike Bull
Posts: 4550
Joined: Mon Dec 01, 2008 1:57 pm

Re: Pic of the Day

Post by Mike Bull » Tue Feb 28, 2017 11:01 am

Tomorrow's POTD finishes the tale but yes, of course we put it back and no, it won't be used again to hold a bottle. Donald wasn't using any breathing air- there was no longer a regulator in the cockpit for him to connect to; his mask was purely for communication.
'I am not what is called a "civilized man", Professor. I have done with society for reasons that seem good to me.'

User avatar
Richie
Posts: 1114
Joined: Mon Mar 07, 2011 3:12 pm

Re: Pic of the Day

Post by Richie » Tue Feb 28, 2017 5:30 pm

And for giving him CO2 narcosis
Clarence come out ov zat tank at vonz !

Black Knight
Posts: 134
Joined: Wed Mar 25, 2015 1:20 am

Re: Pic of the Day

Post by Black Knight » Wed Mar 01, 2017 10:24 am

Odd that the hose wasn't removed from the mask then. Unless he thought it might aact as a snorkel :mrgreen:

User avatar
Renegadenemo
Posts: 4588
Joined: Mon Dec 01, 2008 12:29 pm
Location: N E England
Contact:

Re: Pic of the Day

Post by Renegadenemo » Wed Mar 01, 2017 12:39 pm

Odd that the hose wasn't removed from the mask then. Unless he thought it might aact as a snorkel :mrgreen:
I suspect that was a symptom of his showmanship - wouldn't look quite the fighter pilot with the hose lopped off.
I'm only a plumber from Cannock...

"As to reward, my profession is its own reward;" Sherlock Holmes.

I have wrought my simple plan
If I give one hour of joy
To the boy who’s half a man,
Or the man who’s half a boy.

Sir Arthur Conan Doyle.

Terminator
Posts: 701
Joined: Thu Sep 24, 2009 11:19 pm

Re: Pic of the Day

Post by Terminator » Wed Mar 08, 2017 8:45 pm

I wondered what that piece of foam was doing on the floor when I last visited! Some old guy taking up his new found faith I thought :D
Soft as putty now but we had a hell of a fight to pin those floors down to that pasting table to get all the differing coatings off to enable Bill to get them heat treated. Bloody hard graft if i do say so myself, but all done now though and the Prep department will be closed for business as nowt else to prep me thinks. All Done ? :)

Time to move on to other things once again
Novie
"Never ride faster than your Angel can fly"

Terminator
Posts: 701
Joined: Thu Sep 24, 2009 11:19 pm

Re: Pic of the Day

Post by Terminator » Sat Mar 11, 2017 7:07 pm

Bill and the liquid metal, and judging by the Clock it's 8pm and he's still slaving away. Why am I positive its 8pm and not 8am? Because you would never catch Bill up and about at 8am in the workshop :lol: :lol: :lol: without a doubt.

I've only ever know one exception and that was the day of the lift at 3.30am! :shock:
Novie
I've gone :D
"Never ride faster than your Angel can fly"

User avatar
Richie
Posts: 1114
Joined: Mon Mar 07, 2011 3:12 pm

Re: Pic of the Day

Post by Richie » Sat Mar 11, 2017 7:33 pm

Last welds going in on a week day session
Clarence come out ov zat tank at vonz !

Post Reply